VR100 Series Paperless Recorder

• 4 or 6 Channels



• V, mV, T/C, RTD Inputs



• Color LCD Display



• Data Storage on 3.5" Diskette



• Panel or Desktop Style

Mounting method: Flush panel mounting (in the vertical plane). The recorder may be inclined up to 30░ to the rear with respect to the vertical. It must be installed horizontally in the left-right direction.
Allowable panel thickness: 2 to 26 mm
Material:
Case: Drawn steel
Bezel: Polycarbonate
External Dimensions: (see drawing)
Input section
Number of inputs: Up to 4 channels (can be set with 1 to 4)or up to 6 channels (can be set with 1 to 6)
Measurement intervals:
4-ch model: 125 ms;
6-ch model: 1s
(in case of A/D 100 ms for integration, measurement interval is 2s)
Inputs: DCV (DC voltage), TC (thermocouple), RTD (resistance temperature detector), DI (digital input for event recording), DCA (DC current, with external shunt resistor attached)
Computation:
<Linear Scaling>
Available for DCV, TC, and RTD ranges.
Scaling limits: -20000 to 20000
Decimal Point: User selectable
Engineering unit: User-Definable, up to 6 characters
<Differential computation>
Between any two channels; however, the channel number of the reference channel must be smaller than that of the channel being measured. Available for DCV, TC, & RTD
<Square root>
Available for the DCV range
Scaling limits: -20000 to 20000
Decimal points: User-selectable




Range	Setting	Measuring Range
DC Voltage (DCV)
	20 mV	-20.00 to 20.00 mV
	60 mV	-60.00 to 60.00 mV
	200 mV	-200.0 to 200.0 mV
	2 V	-2.000 to 2.000 V
	6 V	-6.000 to 6.000 V
	20 V	-20.000 to 20.00V
Thermocouple (TC)	Range	Measuring Range
	R*1	0.0 to 1760.0°C
	S*1	0.0 to 1760.0°C
	B*1	0.0 to 1820.0°C
	K*1	-200.0 to 1370.0°C
	E*1	-200.0 to 800.0°C
	J*1	-200.0 to 1100.0°C
	T*1	-200.0 to 400.0°C
	N*2	0.0 to 1300.0°C
	C*3	0.0 to 2315.0°C
	J DIN*4	-200.0 to 900.0°C
	T DIN*4	-200.0 to 400.0°C
RTD Resistance Temperature Detector	Range	Measuring Range
	Pt100*5	-200.0 to 600.0°C
	JPt100*5	-200.0 to 550.0°C
Operation Recording (DI)	Range	Measuring Range
	Voltage Input	OFF; less than 2.4V
		ON; 2.4V for more
	Contact Input	Contact ON/OFF
*1 R,S,B,K,E,J,T: ANSI, IEC584,DIN IEC584, JIS C 1602- 1981 *2 N: Nicrosil-Nisil, IEC584, DIN IEC584 *3 W: W-5% Re/W-26% *4 L: Fe-CuNi, DIN43710, U: Cu-CuNi, DIN43710 *5 Pt100: JIS C 1604-1989, JIS C 1606-1989, IEC751, DIN, IEC751, JPt100: JIS C 1604-1981, JIS C 1606-1989



Engineering unit: User-definable, up to 6 characters
DISPLAY
Display unit: 5.5-inch TFT color LCD (320 x 240 pixels)

Analog display color (default): 4-ch model: Red for channel 1, green for channel 2, blue for 3, violet for channel 4.
(The above colors as well as brown are user-selectable for each channel)
6-ch model: Red, green, blue, magenta, orange, and cyan for channel 1, 2, 3, 4, 5, and 6 respectively
(The above colors as well as brown and gray are user selectable.)

Display span rate: User-selectable from 1, 5, 10, 20, 30, and 60 min/div

Digital indication: Measured values (updated every second), engineering units (up to 6 characters), tag (up to 7 characters)

Memory status display: The memory status is displayed when sampling the event input signals and storing them in an event file in the trigger mode.

Other display items: Scale values (0 and 100%), grid, current time, trip point, event mark, alarm (ALM)

Data referencing function: By horizontally splitting the waveform display area into two, the current and reference waveforms can be compared on the display.

Data magnification/reduction function: The time scale of analog display can be magnified/reduced.

LCD backlight saver function: The LCD backlight automatically dims if no key is touched for a certain preset time (can be set from 1 to 60 minutes)

Data saving function
Storage medium: 3.5-inch floppy disk (2HD) (can be formatted for 1.2 or 1.44 MB.)

Saving method: Copying of data from the internal memory of 1 MB for 4 input type, or 1.4 MB for 6 input type, to a floppy disk.

Data saving period: Linked to the sampling period (for an event file) or the waveform span period (for a display data file)

Event file sampling period:

Selectable from 125 ms, 250 ms,

500 ms, and 1 sec for 4-ch model,

and from 1, 2, 10, 30, 60 or 120 sec for 6-ch model

Files can be created in the following combinations:

(1) Event file + display data file

(2) Event file x 16 + display data file

(3) Event file only

Other files: Setup list file (setup data), information file (event, power failure, and alarm information.)

Event recording: Starting by a remote contact/panel/alarm Pre-trigger function (The trigger point is set in increments of 10% of the memory length.

Alarm Functions
Number of alarm levels: Up to four levels for each channel

Alarm types: High and low limits, differential high and low limits, and high and low rate-of-change limits

Display: The alarm status (type) is displayed in the digital value area when an alarm occurs. A common alarm is also displayed.

Outputs: 2, 4 or 6 points (optional)

Memory: The times at which alarms occurred/were cancelled, the types of alarms, etc., are stored in the memory (up to 50 alarm events common to all channels are stored.)

Power supply

Rated supply voltage: 100 to 240 VAC (automatic switching)

Allowable supply voltage range: 90 to 132 or 180 to 250 VAC

Rated supply frequency: 50/60 Hz (automatic switching)

Power consumption: Others

Clock: With calender function (Western calender), the time can be adjusted by a remote option).

Accuracy of clock: ▒100 ppm, excluding a delay (of 1 second, max) that occurs each time the power is turned ON/OFF.

Memory backup: The setup parameters are backed up by a built in lithium battery (battery life: approx. 10 years at room temperature). The measured values are stored in the flash memory, hence the backup time is not limited.

Insulation resistance: At least 20 M between each terminal and ground ( at 500 V DC)

Dielectric strength:

Power supply to ground: 1500 VAC (50/60 Hz), 1 minute
Contact output terminal to ground: 1500 VAC (50/60 Hz), 1 minute
Measuring input terminal to ground: 1000 VAC (50/60 Hz), 1 minute
Between measuring input terminals: 1000 VAC (50/60 Hz), 1 minute
Remote control terminal to ground: 500 V DC, 1 minute

Normal operating conditions
Supply voltage: 90 to 132 or 180 to 250 V

Supply frequency: 50 Hz ▒2%, 60 Hz ▒2%

Ambient temperature: 0 to 50░C (when using FDD: 5 to 40░C)

Ambient humidity: 20 to 80% RH (at 5 to 40░C)

Mounting position: The recorder may be inclined up to 30░ to the rear with respect to the vertical. It must be installed horizontally in the left-right direction.

Application Software
(accessory)
Includes both Data Conversion and Viewer software:

Data Conversion Software Outline of function:
Converts data saved on a floppy disk to ASCII, Lotus, or Excel format.
OS environment: MS-DOS

To Order (Specify Model Number)
Model Number	Price	Description
VR104P	$3425	4 Channel recorder, panel style
VR104P-AR4	3625	4 Channel recorder with 4 alarm relays
VR104P-AR4-RS422	3795	4 Channel recorder with 4 alarm relays and RS422
VR104P-FR	3595	4 Channel recorder with fail/memory end output
VR104P-RMT	3575	4 channel recorder with remote control
VR104P-FR-RMT	3745	4 Channel recorder with fail/memory and remote control
VR104P-AR4-RS422-FR-RMT	4115	4 Channel recorder with alarm, RS422, fail, and remote control
VR100-SW	95	Software, VR100 Series recorders

U.S.A. and Canada International Callers; Sales & Service; 203.359.1660

Please E-Mail any comments or suggestions to OMEGA®. ® COPYRIGHT 1999 OMEGA ENGINEERING, INC. ALL RIGHTS RESERVED